Thicknessing Jig for Handplanes

Thicknessing Jig for Handplanes

€60.00
Add To Cart

Handplanes thicknessing jig for kumiko strips or other small and precise pieces dimensioning.

Base made from Birch plywood and Oak fence and side rails.

Thickness can be set by combining the four spacers. It includes a 2 mm, 3 mm and two 4 mm. Without any spacer the thickness is 15 mm maximum.

For in between thicknesses shims of paper or cardboard can be used. Rail length is 305 mm (12”) therefore the maximum length of the piece planed.

Overall Dimensions Length 325 mm (12.8”), Width 125 mm (5”)

!! Please write in the comments section during checkout your plane width !!

(Veritas Low Angle Smoothing plane and most of the 50 mm Japanese Kanna have the same width, as seen in the pictures)

Made in 2-3 working days after the order is placed. Shipping calculated at checkout.

An old video using the jig for kumiko strips making:

Standard Shooting Board XL SBXL 2.jpg

Standard Shooting Board XL

€60.00
Standard Shooting Board SB 1.jpg

Standard Shooting Board

€50.00
Miter Box Shooting Board XL MBXL 2.jpg

Miter Box Shooting Board XL

€75.00
Miter Box Shooting Board MB 1.jpg

Miter Box Shooting Board

€60.00